T. G. Rankin Company - supplying Gage Glass, Sump Pumps, Septic Systems, Jet pumps, sight glass, gauge glass T. G. Rankin Company - supplying Gage Glass, Sump Pumps, Septic Systems, Jet pumps, sight glass, gauge glass T. G. Rankin Company - supplying Gage Glass, Sump Pumps, Septic Systems, Jet pumps, sight glass, gauge glass T. G. Rankin Company - supplying Gage Glass, Sump Pumps, Septic Systems, Jet pumps, sight glass, gauge glass
T. G. Rankin Company - supplying Gage Glass, Sump Pumps, Septic Systems, Jet pumps, sight glass, gauge glass T. G. Rankin Company - supplying Gage Glass, Sump Pumps, Septic Systems, Jet pumps, sight glass, gauge glass
T. G. Rankin Company - supplying Gage Glass, Sump Pumps, Septic Systems, Jet pumps, sight glass, gauge glass
Home
Gage Glass
Industrial
Plumbing
Waste Water
Links
Search
Policies
Home arrow Plumbing arrow Effluent Pump
Effluent Pump Print E-mail

Effluent pumps are essentially sump pumps on steroids

Now featuring GlentronicsPHCC Pro-Series sump pump systems and controls

An Effluent pump is often used inside a septic tank. Effluent is the liquid present after solids have settled. For various applications, effluent pumps range in horse power from 1/4, 1/3, 1/2, 3/4, 1 and up. Used primarily for pumping semi-clear liquids, submersible centrifugal effluent pumps can pass 5/8" solids.

 

To the right is 1/2 HP Submersible Centrifugal Effluent Pump




4/10 HP "Pump 'N' Dose Series" high head effluent pump, 33 GPM @ 5’

3/4” Solids Handling, HD Mechanical Seal, Durable Cast-Iron Motor Housing, Reinforced Thermoplastic Pump Housing, Upper and Lower Ball Bearings for Longer, Life, IMPELLER-Heavy-Duty Reinforced Thermoplastic for Rugged Operation and Dependable Service, SHAFT SEALS - Full Mechanical Seal (Carbon/Ceramic) for Extra Protection and Longer Life, MOTOR - Permanent Split Capacitor Design for Assured Starting and Strong Torque - Internal Overload Protection, 115 Volt, 20’, SJTW or SJTOW Power Cord, 11” or Wider Sewage Basins, Shipping Weight, 24 lbs

TEF-30 series effluent pump

53 GPM @ 5' TDH, Durable Cast-Iron Motor, Volute, and Pump Housing. Stainless Steel Fasteners, Carbon/Ceramic Shaft Seals for Superior Longevity, Reliable Glass-Reinforced Plastic Impeller, Hermetically Sealed Motor Housing, Upper and Lower Sealed Roller Bearings for Streamlined, Performance, High Capacity 1-1/2" NPT Discharge Capable of Handling Up To 1/2" Solids, Top Suction Design Filters Debris and Minimizes Clogging. Manual Operation, 20’, SJTW Power Cord, Shipping Weight, 26 lbs, 11" or Wider Sewage Basins



Several Brands are offered Power-Flo Liberty Gould's Ebara Myer's Starite Hydromatic superior to Zoeller and Little Giant
Available are designs in serveral types, sizes and materials.
C
lick here to conatct us for assistance selecting the type of float switch or automatic control - alarm panel to suit your application.

For more information including pricing, or design assistance click here to email us.




ABS Scavenger Submersible Pumps are designed for continuous underwater operation in installations handling liquids containing suspended solids. The motor and pump form a close coupled, watertight unit capable of operating while submerged to a depth of 65 feet. The squirrel cage induction motor is insulated against heat and moisture in accordance with Class B regulations.

These pumps are available in single or three phase power. 4/10th and 1/2 HP units come with a Poly vortex impeller. 1 HP units come with the patented contra-block impeller. 1 HP units come with a 20' power cord with leads. All other units come with a 15' cord with a molded plug.

 



 
 
 
Gould's PE-Series Submersible Effluent Pump
Corrosion resistant construction, Cast iron body, Thermoplastic impeller and cover,
Upper sleeve and lower heavy duty ball bearing construction, Motor is permanently lubricated for extended service life, Powered for continuous operation, All ratings are within the working limits of the motor, Quick disconnect power cord, 20' standard length, heavy duty 16/3 SJTW with NEMA 5-15P, three prong, 115 volt grounding plug, Complete unit is heavy duty, portable and compact, Mechanical seal is carbon, ceramic, BUNA and stainless steel, Stainless steel fasteners







Barnes EHV-Series Submersilbe Effluent Pump
Power .5 HP, voltage 115, 3450 RPM, Full amp load 6.4, Switch arrangements vertical, wide angle, and manual, Heads to 110-feet, Corrosion resistant construction, Cast iron body, Thermoplastic impeller and cover, Upper sleeve and lower heavy duty ball bearing construction, Motor is permanently lubricated for extended service life, Powered for continuous operation, All ratings are within the working limits of the motor, Quick disconnect power cord, 20' standard length, heavy duty 16/3 SJTW with NEMA 5-15P, three prong, 115 volt grounding plug, Complete unit is heavy duty, portable and compact, Mechanical seal is carbon, ceramic, BUNA and stainless steel, Stainless steel fasteners





Filtered Pump Vaults, with self-contained pump and alarm alarm switches. Simplex and duplex designs for high head filtered effluent applications. Perfect for large subdivisions or steep terrain developments where distances and hills make pumping to treatment a challenge for other pressure sewer designs. Often STEP systems are a worthy alternative to grinder pump sewege stations.

STEP systems work in conjunction with a solids collection (Septic) tank. During times of power or pump failure, STEP systems offer considerbly more "Flushing" capacity than a typical grinder sewage ejector system. The cost of pump replacement in a STEP system is considerably less than a comparable residential grinder pump.


 

High Head Turbine Filtered Effluent PumpsTurbine pumps, similar to (fresh) water-well pumps, are another type of effluent pump. Turbines are capable of much higher pumping pressures (heads) than centrifuguals. Often they are used in pressure sewer applications where only the effluent is sent to treatment. Trubines are not designed to handle solids and work best when installed in applications where the effluent is filtered.

We offer a variety of turbine pumps for new applications or to replace S.T.E.P. system effluent pumps for peat filter, mound systems, sand filter low pressure dosing systems and drip irrigation onsite wastewater dispersal systems. All have design features for long trouble-free operation; continuous duty rating, stainless steel corrosion resistant construction, hermetically sealed motor.

Stocked in several models and voltages for 8, 12 and 20 gallon per minute (GPM) applications. Larger flow turbine pumps are also available.










Ultraviolet (UV) Effluent Sterilization

Salcor and Aquapoint ultra-violet effluent sanitizer post secondary treatment ATU for open discharge of residential waste streams beats chlorine chlorinization chlorinators For back end sterilization on ATUs in open discharge. Salcor UV sterilization beats chlorinators hands down. New UV sterlizing unit that is designed expressly for gravity flow from a secondary treatment plant or sand filter. Insures public health protection on problem or ecologically sensitive sites without the undesirable chemical side effects of chlorine or mechanical complexity of ozone generators. The Salcor Unit Supplies 30,000 micro-watts/cm2 of UV radiation (16,000 micro-watts/cm2 are required to meet USPHS standards for drinking water - 6,600 to kill fecal coliform. The discharge levels of contaminants and nutrients are so low they can be safe for open discharge where permitted. Units are 4" pipe size and can be set in parallel or series for up to 54,000 GPD.

For more information or to discuss your application click here

 

 

 

 

 

 
Home | Links | Contact

KANSAS CITY
1801 Jasper
N. Kansas City, MO 64116
816-421-4646 Phone
816-421-6120
Fax
ST. LOUIS
233 Chesterfield Industrial Blvd.
Chesterfield, MO 63005

636-532-4555 Phone
636-532-4716 Fax
© 2017 T.G. Rankin Company, Inc. | site development - Sippel Technologies, Inc. - web site development