SJE Rhombus Pump Switches, Controls and Alarms

We have all your "sumping" and "pumping" accessories. If you don’t see it here, email us your requirements.

We stock all types of pump switches including float-type, mercury, and pressure sensing switches. We offer standard and custom configures pump control and alarm panels.

Tank Alert® ABW wireless alarm system

The Tank Alert® ABW wireless alarm system offers freedom to both installers and homeowners. The Tank Alert® ABW alarm system features a battery operated wireless transmitter that is placed in the tank (up to 150 foot range from the indoor alarm).
An electrician is not required, since no hard wiring is needed. When the high water alarm float switch activates, the transmitter sends a signal, sounding the indoor alarm. With no cable to bury, installers don’t need to haul heavy equipment to the site to dig up the homeowners’ yard.

Tank Alert® ABW Alarm Features
- Automatic alarm reset
- 9 VDC battery backup
- Alarm test switch
- Alarm silence switch
- Green power on indicator
- Low battery chirp
- Loss of signal alarm
- Option to monitor additional level via hard wired control switch

Tank Alert® ABW Transmitter Features
- Remote wireless transmitter with up to 150’ range
- Lithium battery lasts two years

AL1017796

Today’s panels can be set up on an auto dialer with a Data Minder, which can send a trouble report to your service technician virtually elmminiating costly flooding basements.

Check Valves

Properly installed check valves will prevent needless pump starts.

All-Bend Multi-Angle PVC Pipe Elbow

Finally, a pipe elbow with a selectable angle.  Whether you need a 1/4, 1/8, 1/16 bend or any bend in between you’ll always have the right one for the job.

All-Bend^® is an easy-to-use two-piece PVC elbow that can be cut and assembled to virtually any angle.   This unique ability provides installers with unmatched flexibility and convenience while greatly simplifying the fitting of custom joints.

The All-Bend^® is listed with IAPMO (Uniform Plumbing Code) and NSF International for ASTM standards D2665 (PVC Plastic Drain, Waste and Vent Pipe and Fittings) and also D2466 (PVC Plastic Pipe Fittings, Schedule 40 and potable water).For more information click here: All-Bend 

Polylok D-Box

12" Grate Cover model shown with optional riser

A 20” Diameter D-box is also available.

Use as a Drop Box or D-Box, allows multiple configurations for inlets & outlets.  Use as a Drain Box with a plastic grate for surface water runoff.  The 12” box comes with two seals and threaded nuts for watertight pipe connections.  Optional risers (shown in photo) allow flexibility for installation at various elevations.

The 12” D-Box accepts 2", 3", 4" Schedule 40 & 3" & 4" SDR 35 pipe sizes. The 20” d-box accepts all of the above plus 6”.  Both models now accept 4” corrugated pipe. 

All Polylok risers have a patented tear off flange for casting into concrete that can be removed in frost prone areas when additional risers are added.  The 12” (shown) comes with anti-float feet to keep the unit stable during and after installation.  All polylok D-boxes can be ordered with a solid or grate cover.

Sump Pits and Sewage Basins

The correct basin and cover can be found in stock for any need from the simple storm water sump to the biggest duplex sewage ejector. We have all the right covers and connections to comply with your local plumbing codes.

Cultec Storm Water and Effluent Chambers

Cultec Chambers can be used in sub-surface on-site wastewater and stormwater management projects. Most commoly used as replacements for conventional pipe and stone trenches or beds and retention ponds. Approved in most states for septic leachfields. Reclaims land for other uses (parking/attractive landscape). For commercial developers, more parking and green space allows a greater amount of store space. Cultec is the most cost effective chamber design. Save on labor, time and land area required.

Email us your requirements