Plumbing and Pump Accessories

SJE Rhombus Pump Switches, Controls and Alarms

We have all your "sumping" and "pumping" accessories. If you don’t see it here,
email us your requirements.

We stock all types of pump switches including float-type, mercury, and pressure sensing switches. We offer standard and custom configures pump control and alarm panels.

PS Patrol® system features a built-in high water alarm and provides a convenient location to connect all wiring required for a pumping station application.

The PS Patrol® employs a receptacle to accept either a 120 VAC or 230 VAC pump and/or piggy-back pump switch. Vent holes on each side of the post help prevent moisture condensation inside of post.

- Pedestal rated for outdoor use
- Pull out assembly for easy wiring
- Control switch provides alarm activation
- Convenient test/normal/silence switch mounted externally for easy operation
- Separate 120V alarm and pump circuits
- Receptacle for 120V or 230V pump and/or pump switch
- CSA Certified

SJE Rhombus Tank Alert XT Alarm
Versatile, indoor or outdoor liquid level alarm system. This alarm system monitors liquid levels in lift pump chambers, sump pump basins, holding tanks, sewage, agricultural, and other non-potable water applications. The Tank Alert® XT indoor/outdoor alarm can serve as a high or low level alarm depending on the float switch model used. The alarm horn sounds and the red beacon illuminates when a potentially threatening liquid level condition occurs. A "power on" light on the switch indicates power to the alarm panel.

SJE Rhombus Tank alert AB Alarm
Easy-to-install liquid level alarm system with auto-reset and battery backup features for indoor use. This alarm system monitors liquid levels in lift pump chambers, sump pump basins, holding tanks, sewage, agricultural and other water applications. Tank Alert® AB alarm system can serve as a high or low level alarm depending on the float switch model used. The alarm horn sounds when a potentially threatening liquid level condition occurs. The horn can be turned off, but the alarm light remains on until the condition is remedied. Once the condition is cleared, the alarm will automatically reset. A green "Power On" light indicates 120 VAC primary power to the alarm. Low battery chirp feature indicates when battery should be replaced.


The Tank Alert® ABW wireless alarm system offers freedom to both installers and homeowners. Tank Alert® ABW alarm system features a battery operated wireless transmitter that is placed in the tank (up to 150 foot range from the indoor alarm).
An electrician is not required, since no hard wiring is needed. When the high water alarm float switch activates, the transmitter sends a signal, sounding the indoor alarm. With no cable to bury, installers don’t need to haul heavy equipment to the site to dig up the homeowners’ yard.

Tank Alert® ABW Alarm Features
- Automatic alarm reset
- 9 VDC battery backup
- Alarm test switch
- Alarm silence switch
- Green power on indicator
- Low battery chirp
- Loss of signal alarm
- Option to monitor additional level via hard wired control switch

Tank Alert® ABW Transmitter Features
- Remote wireless transmitter with up to 150’ range
- Lithium battery lasts two years

Today’s panels can be set up on an auto dialer with a Data Minder, which can send a trouble report to your service technician virtually elmminiating costly flooding basements.

New!! Hydromatic D-Switch. Diaphragm switch with thermal plastic body and double seal construction. Similar in operation to other diaphragm switches in that it is actuated by the weight of hte rising water in teh pit. Hydromatic dramatically improved the design by installing several engineered features including a douldle diaphragm seal.

Check Valves

Properly installed check valves, by preventing needless pump starts, greatly extend the life of your pump. We offer check valves in all sizes and configurations. Simple sump pum check vavles and heavy duty, larger sized sewage check vavles. Please contact us to discuss you application.


Dallas Specialty Plumbing Accessories, No-Hub Couplings, Yard Boxes

Wide variety of heavy-wall flexible PVC no-hub pipe couplings for sewer and drain use, cleanouts, tools, cutters, yard boxes, pipe insulation, tracer wire, receptor drain grates, shower pans, fittings, competitively priced, quick ship.


All-Bend Multi-Angle PVC Pipe Elbow

Finally, a pipe elbow with a selectable angle. Whether you need a 1/4, 1/8, 1/16 bend or any bend in between you’ll always have the right one for the job.

All-Bend® is an easy-to-use two-piece PVC elbow that can be cut and assembled to virtually any angle. This unique ability provides installers with unmatched flexibility and convenience while greatly simplifying the fitting of custom joints.

Each All-Bend® package comes complete with a two-piece selectable angle elbow, angle measuring templates and installation instructions. All-Bend® units are currently offered in white, rigid PVC for 1 1/2", 2", 3" and 4" pipe.

The All-Bend® is listed with IAPMO (Uniform Plumbing Code) and NSF International for ASTM standards D2665 (PVC Plastic Drain, Waste and Vent Pipe and Fittings) and also D2466 (PVC Plastic Pipe Fittings, Schedule 40 and potable water).For more information click here: All-Bend

Polylok D-Box

12" Grate Cover model shown with optional riser

A 20” Diameter D-box is also available.

Use as a Drop Box or D-Box, allows multiple configurations for inlets & outlets. Use as a Drain Box with a plastic grate for surface water runoff. The 12” box comes with two seals and threaded nuts for watertight pipe connections. Optional risers (shown in photo) allow flexibility for installation at various elevations.


The 12” D-Box accepts 2", 3", 4" Schedule 40 & 3" & 4" SDR 35 pipe sizes. The 20” d-box accepts all of the above plus 6”. Both models now accept 4” corrugated pipe.

All Polylok risers have a patented tear off flange for casting into concrete that can be removed in frost prone areas when additional risers are added. The 12” (shown) comes with anti-float feet to keep the unit stable during and after installation. All polylok D-boxes can be ordered with a solid or grate cover.

Sump Pits and Sewage Basins

The correct basin and cover can be found in stock for any need from the simple storm water sump to the biggest duplex sewage ejector. We have all the right covers and connections to comply with your local plumbing codes.


Jackel Radon Sump Dome Cover



Using concrete fasteners and a tube of caulk (not included) this cover when properly installed over your existing sump pit can help prevent the flow of harmful radon gas into your home. Designed to cover over existing unsealed sump opening in the floor. Jackel’s radon sump dome has a gasketed removable cover with connections to allow service access to plumbing and electrical connections for your sump pit / pump. It hides, protects and seals off your sump pit.