Saniflo offers a range of macerating and grinding pump systems that reduce the size of fecal matter and waste allowing flexibility in placement of sanitary applications. Saniflo offers the most reliable and cost-effective solutions for any job, whether its a small project requiring drain or condensate pumps to more complex engineered jobs, even whole buildings with multiple fixture units.
The Sanicubic 1 is a 1HP heavy duty simplex grinder system used to pump away waste water from several bathrooms and fixtures from an entire building structure. This system is able to discharge the waste up to 36 feet vertical and/or 328 feet horizontal. It incorporates a grinder system which is ideal for uncontrolled environments in both residential and commercial applications (i.e. rental unit, offices, warehouses, etc.). The Sanicubic 1 is designed to handle sanitary products that may have been flushed down the toilet.
- Discharges the waste through a 1-1/2" rigid pipe. A built-in non-return valve is included on the internal discharge pipe.
- Has been designed with a 1-1/2" vent connection on top of the enclosure. All plumbing codes require connection to a vent system. Please note that the vent system should be a two-way air vent as air needs to freely flow both ways. NOTE: The use of mechanical vents, air admittance valves or similar devices is not permitted.
- IP68 rated for possible submergence which eliminates any potential water damage to internal components. It comes with an external control panel as well as a visual and audible alarm system (15' long wire).
- Pump discharges wastewater from several toilets, sinks, bath/showers, urinals and even washing machines. The wastewater from other sanitary fixtures is drained into the Sanicubic 1 via four 1-1/2" or 4" inlets on either side of the housing and on top of the enclosure. Note: When draining wastewater into the pump through either of the side inlets, an external check valve (not supplied with unit) has to be installed. There should be a minimum of 10" height difference between the base of the Sanicubic 1 to the bottom of the shower/bathtub drain or to the base of the toilet.
- UPC Certified
- Available in 120v and 240v
Duplex Grinding System capable of discharging wastewater from multiplie fixtures from entire building structures.
A pre-assembled duplex grinder system capable of discharging wastewater from multiple fixtures
- 36 Ft ↑ and/or ← 328 Ft →
- Two powerful 1 HP motors
- Capable of handling multiple fixtures at the same time
- Grinder system designed to handle sanitary products
- Rated IP68 with external control and alarm
- Easy-access service panels
- Capable of handling up to 90 GPM